How to restart your Philips 10BDL5051T screen

This guide shows two ways to restart the Philips 10BDL5051T Rooms display. If your display is the older Philips 10BDL455 model, with the power button on the back, use this guide instead.

Quickest way: unplug the cable

The display gets its power from the network cable (PoE) or from a separate power cable. Unplug the cable, wait about 10 seconds and plug it back in. The display starts up and Systam Rooms opens automatically.

Restart from the settings menu

1. Press the power button once. It is on the right side of the display when you are facing it. Right after that, press the volume-down button once. A password prompt opens.
2. Enter the default password 1234, or the password you have set yourself.
3. Tap Power in the bottom left corner.
4. Choose Reboot. If you want to switch the display off, choose Power off.

If Systam Rooms does not open after the restart, see Troubleshooting Systam Rooms displays.

That's it, your display is back up and running.