How to restart your Philips 10BDL455 screen

This guide shows two ways to restart the Philips 10BDL455 Rooms display. If you have the newer Philips 10BDL5051T, with the power button on the side, use this guide instead.

Quickest way: unplug the cable

Unplug the display's power or network cable, wait about 10 seconds and plug it back in. The display starts up and Systam Rooms opens automatically.

Restart from the settings menu

1. Press the round power button on the back of the display once. Right after that, press the volume-down button once. A password prompt opens.
2. Enter the default password 1234, or the password you have set yourself.
3. Tap Power in the bottom left corner.
4. Choose Reboot. If you want to switch the display off, choose Power off.

If Systam Rooms does not open after the restart, see Troubleshooting Systam Rooms displays.

Done, your display is ready to use again.