Setting up network and power connections for the self-service kiosk

The self-service kiosk needs a stable network connection and a power connection to work properly. This guide explains the steps and requirements for setting up these connections. 

Network connection:

• Self-service kiosks are connected to the network with a cable.
• The device needs an open connection to the public network.
• Device updates are managed centrally through the EloView service. See EloView network requirements.

Power connection:

• The devices need a standard 230V power outlet (Systam X) or two (Systam Lite + printer or Systam Table X).

Wi-Fi

• If you need to use Wi-Fi, here's how to set it up.
• Locate the Home button on the back of the display and press it. Depending on your display type, you may need to press the Power button and Home button simultaneously. 
• You can find the network settings in the top right hamburger menu (three lines). 
• Hold the Wi-Fi button down for a few seconds to access the Network & Internet settings. 
• Select and set up your preferred network.